•
spindle
英：【spɪndl】美：【ˈspɪndl:】
英：
美：
纺锤体, 细长的人或物
动词过去式:
spindled
动词第三人称单数:
spindles
动词现在分词:
spindling
动词过去分词:
spindled
1 、Even from distance I can tell from the
spindle
figure that the approaching man is David.───尽管在远处我也能从这细长的身躯辨别出来人是大卫。
2 、There are buttons, knobs,
spindle
s, no monitor.─── 只有按钮 旋钮 转轴 没有显示器
3 、Myoid cells had three types: epithelioid, intermediate, and
spindle
, which showed the relations with immunohistochemistry.───平滑肌样细胞分为上皮样，中间型和梭形，与免疫表型有关。
4 、A single
spindle
should yield a transfer rate of approximately 30 small messages per second.───一个心轴应能实现大约每秒30封小邮件的传输速率。
5 、Spindle、collets、press brush、bits are consumptions, one year warranty is not included.───主轴、刀具夹头、压力刷属消耗品,不在一年保固范围内。
6 、The clerk put the check on a
spindle
.───店员将支票放到扦子上。
7 、She layeth her hands to the
spindle
and her fingers hold the distaff.───她天没亮就起床，为家人做饭，为妹妹准备嫁妆。
8 、Tilt the selected
spindle
, slide it into the coating sample and carefully attach it to the viscometer.───倾斜所选择的锭子，将其倒到涂层的试样上并小心地附着在粘度计上。
9 、Use it as the blade of double
spindle
agitator of brick manufacture,the service life is 5 times ihan that of hardened 45# steel.───在制砖机双轴搅拌器的叶片上实际运用考核中，比原45#钢淬火件提高寿命5倍之多。
10 、Keeping the disk
spindle
turned off can save much of the power consumed by the disk drive under normal usage.───使磁盘轴保持关闭状态可以节省由磁盘驱动器在正常使用期间所消耗的大量电源。
11 、She layeth her hands to the
spindle
, and her hands hold the distaff.───他手拿捻线竿。手把纺线车。
12 、Microscopically, the neoplastic cells were in ovoid or
spindle
and some of themhad indistinct cell borders.───光镜：肿瘤细胞呈梭形及卵圆形，细胞间界限不清。
13 、Spindle support on ceramic balls bearings at oblique contact for high speed.───为确保高速，采用陶瓷滚珠轴承与主轴斜向接触。
14 、Spindle is the measure for yarn.───司品德是纱的度量单位。
15 、New “X” servo motor, new
spindle
bearings, new pinion &gear drive in 2007.───2007年配新“X”伺服电机，新主轴轴承，新小齿轮和齿轮驱动。
16 、The tailstock
spindle
is also locked in a similar manner.───尾架主轴也锁定在一个类似的方式。
17 、Test conditions for milling machines with table of variable height. Testing of the accuracy. Part 2: machines with horizontal
spindle
.───带升降工作台的铣床的试验条件。精度试验。第2部分:卧式机床。
18 、The
spindle
micrometer is used to check the voltage versus distance characteristics of the probe and proximitors.───千分尺用来检测趋近式探头电压与距离的特性曲线。
19 、Dynamic performance of a ceramic bearing
spindle
unit is studied in this paper.───对陶瓷轴承主轴单元的动态性能特点进行了实验研究。
20 、The sample frame with the neoteric
spindle
was also int...───同时还简单介绍了装配这种锭子的纺纱样机。
21 、Based on XD5032 type milling machine ,XD5032/BQ type time verying
spindle
milling machine has been designed.───在长春第二机床厂生产的XD5032型立式升降台铣床的基础上首次研制开发了一台XD5032／BQ型变速切削铣床。
22 、The
spindle
runs along the wall saw track that is typically bolted to the cutting surface.───主轴范围沿轨道即通常看到墙上的螺栓切割面。
23 、Every
spindle
is driven by a servo-motor.───单锭伺服驱动。
24 、Setting proper knee position over pedal
spindle
.───在脚踏轴的上方设置正确的膝盖位置。
25 、In her hand she holds the distaff and grasps the
spindle
with her fingers.───她手拿捻线竿,手把纺线车。
26 、Info:We can produce Polyester and Viscose open end yarn/Polyester and Viscose OE yarn. All the
spindle
......───主要材质:涤纶次要材质:粘胶/人造丝颜色:本白用途:针织
27 、The patient was diagnosed as
spindle
cell hemangioendothelioma based on the clinical data and histological examination.───依据临床表现和组织病理学改变,诊断为梭形细胞血管内皮瘤。
28 、Rotary
spindle
is an important component in the crossbreaking payoff reel of cold rolled sheet plant,which directly effects the normal production.───回转接头是冷轧厂横切开卷机组中的重要部件，它的好坏直接影响到机组的正常生产。
29 、Select triple
spindle
or quadruple
spindle
accordingly to increase production efficiency.───可依需要选定三轴或四轴式，来增加生产效力。
30 、However, to gain any performance, you must have a dedicated
spindle
set for each storage group.───不过,为了提高性能,每个存储组必须使用专用的心轴组。
31 、Not only should the logs be on a different
spindle
set, but that
spindle
set should be dedicated only to logs.───不仅应将日志放在不同的心轴组上,而且该心轴组也应专门供日志使用。
32 、The heavy flywheel coupled with the
spindle
ensures smooth running of the
spindle
.───主轴装有飞轮,能保证主轴运转平稳。
33 、HP Rollfeed Hardware Kit,Spindle Assy,End Cap.───HP托架一套，纸杆，托架，纸卡，
34 、In these cells, ones attention is drawn to the
spindle
pole, its nature, and function.───在这些细胞中，纺锤极的性质和功能是值得注意的。
35 、The blade is mounted on the
spindle
of the wall saw.───叶片是装在墙上看到主轴。
36 、The inner
spindle
protrudesfrom the gear-box and contians a means for mounting various types ofchucks ,face plats ,and dog plates on it .───变速箱中突出的内轴含有接口，可连接各种型号的卡盘，面盘，狗盘。
37 、During anaphase I of meiosis pairs of chromatids still connected at their centromere move to the
spindle
poles.───在减数分裂后期I中，由于纺锤丝的牵引，使成对的同源染色体各自发生分离，并分别向两极移动。
38 、The blade is mounted vertically on the
spindle
of the flat saw.───叶片垂直安装在主轴单位龙卷风。
39 、The main valve
spindle
incorporates an inner
spindle
for double regulation memory stop and valve position setting.───主阀轴配置一个内轴，适用于双重调节止动记忆和阀门位置设置。
40 、Lubricating and cleaning
spindle
coned disk spring .───主轴的碟形弹片的润滑与清洁。
41 、Thats enough. I checked the
spindle
.─── 够了 我检查过那根立柱
42 、In this method, the cutter is mounted in the
spindle
and brought into contact with the sensor to measure its length.───在这些方法中,刀具是镶嵌在心轴上并与传感器产生连接对其长度进行测量.
43 、I thought that, too, but every time I had the dream, the dead mans boots as he was being dragged down the stairs his boot snapped a
spindle
.─── 我也这么想过 但是每一次我做那个梦 那个死人的靴子 当他被拖下楼梯时 他的靴子折断了一根旋梯立柱
44 、Microscopically,the neoplastic cells were in ovoid or
spindle
and some of themhad indistinct cell borders.───光镜:肿瘤细胞呈梭形及卵圆形,细胞间界限不清。
45 、As soon as she touched the
spindle
she pricked her finger.───一旦她碰触了她刺了她的手指纱锭。
46 、We guarantee every pinion,
spindle
, sprocket for the life of the machine.─── 就是我们会保证机器 每个小齿轮 主轴 链轮的使用寿命
47 、The K72 series four-jaw independent chucks are of cylindrcal center mounting connected to the
spindle
nose by adaptors.───K72系列四爪单动卡盘系短圆柱连接形式,通过过渡盘与机床主轴连接.
48 、Do not fold,
spindle
, or mutilate this card.───不要将此卡折叠、**在纸**上或残损
49 、Spindle feeds and speeds are controlled by selector levers which engage the proper gears in the drill head.───主轴的进能量和转速是通过选速杆使主轴箱中的适当齿轮相啮合而控制的。
50 、Technical transfer of AC
spindle
driver from Mechanical Industry Research Laboratories, ITRT(Industrial technology research Institute).───工研院机械所移转交流感应主轴马达驱动控制技术。
51 、But anyway, when he applied pressure, it just started spindling out.─── 但是 当他往下压的时候 里面的东西就开始挤出来
52 、It has a *all
spindle
of fine black thread on it.─── 上面有一个带黑色细线的小纺锤
53 、The girls finger will be pricked by a
spindle
.───她的手指将会被纺锤刺破。
54 、In order to raise or guarantee the precision and dynamic stiffness of AMB
spindle
units mounted o...───分析了实现混合控制需要解决的关键技术问题以及混合控制方法的应用展望。
55 、Centrosome A structure found in all eukaryotic cells, except fungi, that forms the SPINDLE during cell division.───中心体：在除真菌以外的所有真核细胞中存在一种结构，在细胞分裂时可以形成纺锤体。
56 、Spindle nose on Gingery miller.───主轴鼻子上金格里米勒。
57 、Lappet and
spindle
setting not correct.───叶子板和锭子设置不正确。
58 、New “X” servo motor, new
spindle
bearings, new pinion & gear drive in 2007.───2007年配新“X”伺服电机,新主轴轴承,新小齿轮和齿轮驱动。
59 、D. Clean the slots of O-rings, Talfon slots, body
spindle
and spherical surface intensively.───形环沟槽，铁氟沟槽，主体轴心孔及球面加强清洗。
60 、Put in the drawbar to the
spindle
shaft center hole.───将连接杆放在主轴中心孔。
61 、A rigid outboard support system negates
spindle
deflection.───僵化的舷外支持系统的否定主轴偏转。
62 、The K72 series four-jaw independent chucks are of cylindrical center mounting connected to the
spindle
nose by adaptors.───K72系列四爪大型单动卡盘系短圆柱连接形式，通过过渡盘与机床主轴连接。
63 、Under the skin stomatal more, to defend the cell Depression, Changcheng oval or
spindle
.───下表皮气孔器较多，保卫细胞凹陷，常呈卵形或纺锤形。
64 、GMN introduction of the German company leading the international level of high-speed
spindle
manufacturing technology.───引进了德国GMN公司的具有国际领先水平的高速电主轴制造技术。
65 、Medium height, ease for operation; Simple drive system, ease for maintenance; Special treated chemical fiber twisting
spindle
, ease for using.───层高适中,操作特别方便舒适;简捷的传动系统,维护极为方便;经过特殊处理的化纤倍捻锭子,适用范围更广。
66 、Anaphase The stage in mitosis or meiosis when chromatids are pulled toward opposite poles of the nuclear
spindle
.───后期:在有丝分裂或者减数分裂过程中染色单体分别朝相反的两极运动。
67 、It is significant to improve the performance of
spindle
and spinning by studying the
spindle
axis orbit of vibration.───对锭子轴心振动轨迹进行研究,对提高锭子的性能及纺纱质量有重大的意义。
68 、Every
spindle
is driven by a AC motor individually powered by an individual inverter.───单锭独立交流马达变频驱动。
69 、She puts her hand to the distaff and her fingers hold the
spindle
.───她手执纺锤，手指旋转纱锭。
70 、The headstock is connected to an oil cooling equipment to provide thermal stability for the
spindle
system.───主轴箱连接有油冷却设备，以提供主轴系统的恒温。
71 、Driving power for the cutting tool comes from the rotation of the
spindle
, which is a hollow shaft that rotates in bearings.───刀具的驱动力来自主轴的旋转，主轴则是一根在轴承中旋转的空心轴。
72 、When lying between connective tissue fibers, fibroblasts are generally elongated and
spindle
shaped.───当它位于结缔组织纤维间时，纤维细胞一般呈长形及梭形。
73 、One end of the workpiece is clamped in a chuck that is mounted on the
spindle
, the
spindle
rotates in the headstock.───工件的一端装夹在卡盘中，而卡盘则安装在主轴上，主轴在主轴箱里旋转。
74 、Most disks have one
spindle
, although redundant array of independent disks (RAID) devices typically have more than one
spindle
.───多数磁盘只有一个轴,但独立磁盘冗余阵列(RAID)设备通常有不止一个轴。
75 、Large
spindle
pitch and large take-up package, equipped with conveying equipment.───4大锭距，大卷装,配有落筒输送装置。
76 、But the
spindle
was snapped off from the outside, almost like somebody broke it on purpose.─── 但是门把手的轴心从外面被卸掉了 看起来就像是有人故意弄坏的
77 、Multiple mucinous and lipomatous variant of eccrine angiomatous hamartoma associated with
spindle
cell hemangioma: A novel collision tumor?───小汗腺血管瘤样错构瘤的多发黏液和脂肪瘤异型伴梭形细胞血管瘤:一种新的碰撞瘤?
78 、Taper of bore in
spindle
center sleeve morse No.───主轴套内孔锥度。
79 、Spindle and super speed bearing technology is a key point for the
spindle
of the super speed grinder.───主轴系统及高速轴承的设计及制造是超高速磨削主轴系统的一个关键技术。
80 、After the work began, Roller around the
spindle
, and the effects of centrifugal force and spring pressure to keep rolling mill ring.───开始工作后,磨辊围绕主轴旋转,并在高压弹簧与离心力的作用下,紧贴磨环滚动。
81 、The normal rates of meiotic
spindle
and chromosome were 82% and 86% respectively.───发现小鼠成熟卵母细胞纺缍体和染色体的正常率分别为82%和86%。
82 、Use of long separator plates at high
spindle
speeds.───在高锭速下使用长隔纱板。
83 、A nonmoving part of a machine or power tool that supports a revolving part, such as the
spindle
of a lathe.───头座机器或动力工具上用于安装旋转部件的不能移动的部分，如车床的转轴
84 、Taper of hole in
spindle
nose MT No.───主轴锥孔锥度。
85 、Separate hard disks prevent the failure of a single
spindle
from affecting more than one group.───单独的硬盘可以避免单个磁盘心轴的故障影响到多个组。
86 、The layer
spindle
was an early development.───层式纺锤形是早期发展起来的。
87 、KSM offers the following standard
spindle
products.───KSM提供以下各标准的保温钉产品。
求助:数控机床英文名词翻译...
Rapid 快速(进给)
Spindle 心轴,主轴.
Feed 进给 (给料)
Jog Handle 微动手柄
Tail Spindle 尾部主轴
Tape 钢卷尺,磁带.
GL/CF Ground Lamp / Cutting Fluid 接地指示灯/切削液
求助:数控机床英文名词翻译...
RAPID --迅速的
SPINDLE --心轴，主轴
feed--进刀，进给，进料，吃刀量
jog handle--慢进刀处理
TAPE-- ，带子，磁带